OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P213B

EGR Throttle Control Circuit B Range/Performance

P213B is the functional check of EGR throttle B rather than an electrical one. The module compares the position it commands with the position the flap actually reaches, or judges whether the feedback is plausible; if the gap persists beyond a set time, P213B is logged. Regulating flaps sit in a stream of recirculated exhaust and crankcase vapour, so soot and oil deposits that make the blade stiff are the usual reason, followed by worn gears or a weak motor. No manufacturer documents P213B publicly; CARB requires output components to be checked for proper function, and EGR control to be monitored for reaching its limits. The same check for flap A is P0488; pure wiring faults on B appear as P213A, P213C or P213D. The driver notices hesitation, smoke or a power limit.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / 3B

Possible causes

  • Flap stiff or stuck from soot and oil deposits high
  • Worn gear train or weak actuator motor medium
  • Implausible position feedback from the flap sensor medium
  • Outdated engine software or missing flap adaptation low

Symptoms

  • Check engine lamp on
  • Hesitation, black smoke or reduced power
  • Clicking or humming from the flap
  • Filter regeneration may be postponed

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P213B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication