P2139
Throttle/Pedal Position Sensor/Switch D/F Voltage Correlation
P2139 compares signals D and F, in practice the first and third tracks of a three-track accelerator pedal. No manufacturer publishes a detection rule for this exact code; FCA only lists P2139 in emissions recall T21 for the 2004-2006 Dodge Sprinter among codes that can appear after the ECU update. Makers with three-track pedals handle the comparison differently: GM's 2004-2005 trucks scale sensor 3 and test it against sensors 1 and 2 at 0.26 V, then blame the odd track through P2131 or P2126 instead of naming a pair, and Ford reports a deviating track F as P2131. A pair code like P2139 cannot say which of the two tracks is wrong, so check both with a scope while moving the pedal. Effects are a warning lamp and softened acceleration.
Possible causes
- Track D or F of the pedal sensor worn or drifted high
- Contact resistance at the pedal connector medium
- Fault on a shared ground or 5 V reference low
Symptoms
- Engine or wrench warning lamp on
- Softened or delayed acceleration
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P2139
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.