P2136
Throttle/Pedal Position Sensor/Switch A/C Voltage Correlation
P2136 reports that position signals A and C disagree. On engines with two electronic throttles, C typically belongs to the second throttle body: GM's 2023 table 23OBDG07 assigns C to sensor 1 of the bank 2 throttle. Mercedes-Benz documents P2136 for its M177 twin-turbo V8 in AMG C63, GLC63, SL63 and related models: bulletin LI07.10-P-080384 lists it with P2135, the A/G and B/G checks and actuator faults, traces the set to increased electrical resistance in the connector pins of both throttle actuators, and replaces the connector sockets with coated terminals. FCA also lists the code in emissions recall T21 for the 2004-2006 Dodge Sprinter. Expect a warning lamp and possibly reduced power.
Possible causes
- Increased resistance in the throttle actuator connector pins high
- Position sensor in one throttle body drifted or worn medium
- Carbon or ice making one throttle lag behind the other low
Symptoms
- Engine warning lamp on
- Possible loss of power
- Often stored together with P2135
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2136
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.