OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2131

Throttle/Pedal Position Sensor/Switch F Circuit Range/Performance

P2131 means pedal track F is electrically intact but disagrees with the rest of the pedal. Two makers document it for three-track pedals. GM's 2004-2005 truck tables scale APP sensor 3 to the range of the other tracks and set P2131 only when it strays more than 0.26 V from each of the other two sensors, so the majority vote singles out track F; the counter runs every 3 ms and trips at 167 (Type C in 2004, Type A in 2005). Ford's 2012 summary sets it on second-generation ETC when F departs from the others by over 1.1 degrees, lighting the wrench lamp without MIL. Circuit faults on F are P2130 and P2132-P2134. The car stays drivable; the ECU follows the two healthy tracks and softens pedal response.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / 31

Possible causes

  • Worn or dirty track F giving an offset reading high
  • Contact resistance at the pedal connector medium
  • Bent pedal bracket or binding mechanism distorting one track low

Symptoms

  • Wrench or engine warning lamp on
  • Softened, slower acceleration
  • Often no noticeable change while driving

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P2131

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication