P2130
Throttle/Pedal Position Sensor/Switch F Circuit
P2130 is the general circuit code for signal F. GM used it on its 2004-2005 pickups and SUVs with a separate throttle actuator control module (TACM) and a pedal carrying three tracks, where F is APP sensor 3. The TACM flags a continuous or intermittent open or short when sensor 3 reads below 1.63 V or above 4.38 V, or when its learned rest voltage exceeds 4.28 V; each error adds 4 to a counter checked every 3 ms, passes subtract 1, and the code sets at 106. GM's 2004 tables rate it Type C, the 2005 tables Type A with immediate MIL. Ford's three-track pedals split the same duty into P2132 and P2133. Plausibility is P2131, dropouts P2134. With one track lost the other two still steer the engine, usually with reduced response.
Possible causes
- Poor terminal contact or corrosion at the pedal connector high
- Open or short in the signal, reference or ground wire of track F medium
- Third track inside the pedal sensor worn or failed medium
- Faulty input in the throttle actuator control module or ECM low
Symptoms
- Engine warning lamp on
- Softer or delayed response to the pedal
- Reduced power message on some models
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P2130
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.