P211D
Throttle Actuator B Control Throttle Body Range/Performance
P211D is the mechanical check of throttle body B, the twin of P2119. GM's 23OBDG07 table describes four spring tests for bank 2: the opening and closing springs must bring the de-energized plate back to the defined limp position within set times (about 0.2-0.36 s per path), checked during offset learning and also at cold temperatures, each failing in one trip. Ford lists P211D with MIL and wrench lamp for its second throttle (2020-2023; 2024 as P210A byte 92). A sticking plate, a weak spring or ice keep the throttle from returning, so the safe fallback position cannot be guaranteed and power is limited. Position errors in operation are P210B, motor current P211C, stuck positions P211A/P211B.
Possible causes
- Weak or broken return spring in throttle body B high
- Deposits or ice slowing the plate medium
- Throttle adaptation not completed after service low
Symptoms
- Engine warning lamp on
- Reduced power or limp mode
- Unstable idle
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P211D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.