P211B
Throttle Actuator B Control System - Stuck Closed
P211B is set when throttle B on a twin-throttle engine opens less than the controller asks for. Ford lists it for its dual-throttle applications in the 2020-2023 summary and in 2024 as P210A with failure-type byte 73, each with MIL, wrench lamp and detection in under 5 seconds; the A-side logic it mirrors is P2112, where actual angle trailing the target by more than 6 degrees counts as a fault. One bank is then starved of air: the engine feels weak, may stumble at idle and often drops into limp mode. Ice after a frosty night, heavy carbon or a jammed gear train in throttle body B are the usual suspects. The opposite direction is P211A, position control errors P210B.
Possible causes
- Frozen condensate locking throttle B high
- Heavy carbon restricting throttle B medium
- Jammed gear or weak motor in throttle body B medium
Symptoms
- Weak acceleration, limp mode
- Rough idle
- Engine and wrench lamp on
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P211B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.