OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2114

Throttle/Pedal Position Sensor C Minimum Stop Performance

This code reports that position signal C does not show a believable value while its throttle or pedal sits on the lower stop. The controller learns or expects a minimum reading within a tolerance band and flags a fault when the learned value falls outside it. Letter C is rarely assigned: Ford and GM use A/B for the throttle and D/E/F for the pedal, so C appears only on layouts with a third sensor. No manufacturer documents this code publicly; the logic follows the A version P2109 (Subaru) and the Delphi minimum-learn patent. P2113 and P2115-P2117 are the same test for other letters, P2136/P2137 compare C against A or B. Expect a warning lamp and possibly limited power.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / 14

Possible causes

  • Position sensor C worn or drifted near its rest position medium
  • Deposits, ice or a damaged stop prevent the rest position medium
  • Rest position not relearned after repair medium
  • Connector or wiring fault shifting the C signal low

Symptoms

  • Engine or ETC warning lamp on
  • Irregular idle
  • Reduced power possible

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2114

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication