OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2113

Throttle/Pedal Position Sensor B Minimum Stop Performance

The engine computer checks whether position signal B reports a plausible value when the throttle or pedal rests against its lower mechanical stop. At key-on many systems learn this minimum and compare it with a tolerance window; a reading outside that window sets the code. Ford and GM label their second throttle position sensor as B, so on those layouts B means the throttle body, but neither maker publishes P2113 itself. No manufacturer documents this code publicly; Subaru uses the A version (P2109). Ice, coking or a bent stop are typical triggers. P0220-P0223 cover the B circuit, P2109 and P2114-P2117 the other letters. The driver may see a warning lamp and reduced power.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / 13

Possible causes

  • Carbon deposits or ice keep the throttle plate off its rest stop high
  • Position sensor B worn or drifted at the low end of its track medium
  • Minimum position not relearned after cleaning or part replacement medium
  • Corroded connector shifting the sensor B signal low

Symptoms

  • Engine or ETC warning lamp on
  • Unstable or raised idle speed
  • Reduced engine power (limp mode)

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2113

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication