P210F
Throttle Actuator B Control System - Forced Limited RPM
P210F is a status code for the second throttle: the controller has capped engine speed because control of throttle B is no longer reliable. No manufacturer documents this code publicly. Its bank 1 sibling P2110 is well described: in Ford's 2012 summary it follows the loss of both throttle position sensors or a fault found by the throttle plate controller, sets the MIL and wrench lamp and enforces an rpm limit with fuel and spark. P210F would play the same role on engines with two throttles; the root cause is stored as a separate code such as P210A, P210B or a throttle B sensor fault, and that is what gets repaired. CARB treats such fallback modes as malfunctions when they can raise emissions. Expect a hard rev limit.
Possible causes
- Electrical or mechanical fault of throttle B (see companion code) high
- Loss of the position signals of throttle B medium
- ECU software reacting too strictly low
Symptoms
- Engine will not rev past a fixed limit
- Engine and wrench lamp on
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P210F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.