P210D
Throttle Actuator B Control Motor Circuit High
P210D covers the high-side fault of the second throttle drive: a voltage on the motor B circuit that suggests a short to battery, or a supply that stays live when the stage should be off. No manufacturer documents this code publicly. On twin-throttle engines that publish their logic, GM (23OBDG07) and Ford (2024) collect the electrical faults of throttle B under P210A, so P210D will rarely be seen. The CARB rule for output components still applies: an electrical fault in an actuator that affects emissions must be detected and stored. If it appears, treat it like P2103 for bank 1: inspect wiring and connector of throttle B for chafing to a positive feed, then the motor and the ECU output. The engine runs on reduced power.
Possible causes
- Throttle B motor wire shorted to battery voltage high
- Damaged or wet connector at throttle body B medium
- Faulty bank 2 output stage in the ECU low
Symptoms
- Reduced power and uneven running
- Engine warning lamp on
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P210D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.