OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P20F0

SCR NOx Catalyst Over Temperature (Bank 2)

P20F0 is the bank 2 version of P20EC: the SCR catalyst in the second exhaust line has been exposed to temperatures above its permitted limit. It presupposes a V engine with one aftertreatment path per bank, which is rare; most diesels merge both banks into one SCR line and use only the bank 1 codes. No manufacturer documents P20F0 publicly. The physical background is the same as on bank 1: vanadium-based coatings degrade by sublimation above about 550 °C (Navistar patent US20190232224), and the US heavy-duty rule 40 CFR 1036.115 requires the engine design to keep the catalyst below its sublimation threshold. When only one bank overheats, the cause tends to sit on that bank, for instance a leaking injector, a misfiring cylinder or a wrong temperature sensor. Repeated events can permanently lower the bank 2 conversion (P20F2).

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number– / F0

Possible causes

  • Leaking injector or misfire on bank 2 sending fuel into the exhaust high
  • Excess heat during particulate filter regeneration on bank 2 medium
  • Bank 2 SCR temperature sensor reading too high medium

Symptoms

  • Malfunction indicator lamp on
  • Reduced power or interrupted regeneration to protect the catalyst

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P20F0

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication