OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P20E4

Exhaust Gas Temperature Sensor 2/3 Correlation (Bank 1)

P20E4 covers the pair around the particulate filter: sensor 2 at the filter inlet and sensor 3 at its outlet on bank 1 no longer agree. GM documents the code for the diesel in table 15OBDG04 (also 14OBDG04): after a soak of at least 28,800 s the start-up values of the filter upstream and downstream sensors are compared against a look-up limit, and a larger gap is a Type B fault. Because both sensors steer and protect filter regeneration, a biased one can lead to regenerations that run too cool or too hot. P20E2 covers the pair around the oxidation catalyst, while P2084 and P242B report range faults of a single sensor. The patent US7533519 uses the same inlet/outlet arrangement for its stuck-in-range test. Drivers usually see the MIL and may notice more frequent or aborted regenerations.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number– / E4

Possible causes

  • Filter inlet or outlet temperature sensor aged by heat cycling high
  • Heat-damaged or corroded sensor connector or lead medium
  • Heavy soot or ash deposits on a sensor tip slowing its response low

Symptoms

  • Malfunction indicator lamp on
  • Regenerations aborted or happening more often
  • Filter loading warning in some vehicles

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P20E4

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication