OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P20D5

Exhaust Aftertreatment Fuel Injector B Stuck Open

The second exhaust fuel doser (B) keeps passing fuel after it has been told to shut. No manufacturer documents P20D5 publicly; for the single doser A, Volvo and Mack trace the equivalent code P20CF to the fuel supply or the dosing module, and Ram fixed it on Cummins pickups with software. Detection usually relies on pressure in the doser feed line not rising again after closing, or on unexplained heat across the catalyst. Raw diesel in a hot catalyst can overheat it and causes smoke and fuel smell. CARB requires such injection faults to be caught. The stuck-closed counterpart is P20D6.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number– / D5

Possible causes

  • Deposits keeping doser B from sealing high
  • Upstream shutoff valve leaking fuel through medium
  • Calibration error in the control software low

Symptoms

  • Check engine light on
  • White smoke or fuel smell
  • Higher fuel consumption

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P20D5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication