P20D4
Exhaust Aftertreatment Fuel Injector B Control Circuit High
On the second exhaust fuel doser (B), the control line sits at or near battery voltage, so the driver cannot pull it low to open the valve. No manufacturer documents P20D4 publicly. For injector A, GM's diesel tables flag excess current in the switched-on state as a short to power and rate it Type B (P20CE). With doser B out of action, the share of the exhaust it serves no longer gets enough heat for regeneration. CARB requires circuit monitoring for every electronic part of an in-exhaust injection system. For the same doser, P20D1 covers a broken line and P20D3 a grounded one.
Possible causes
- Control wire to doser B shorted to a powered circuit high
- Shorted turns in the doser B solenoid medium
- Faulty output stage in the control module low
Symptoms
- Check engine light on
- Regeneration impaired, soot load rising
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P20D4
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.