P20D3
Exhaust Aftertreatment Fuel Injector B Control Circuit Low
The control line of the second exhaust fuel doser (B) is pulled toward ground. No manufacturer documents P20D3 publicly. For injector A, GM's diesel tables detect this by a switched-off output voltage below about 2 V and treat it as Type A with the MIL after one trip (P20CD), because a grounded line can open the valve without command. A similar strict rating is likely for B. CARB requires each electrical part of an in-exhaust injection system to be checked for circuit faults. The open circuit is P20D1, the short to power P20D4. Only engines with two dosing points can set this code.
Possible causes
- Chafed control wire to doser B touching ground high
- Moisture in the doser B connector medium
- Internal short in doser B low
Symptoms
- Check engine light on
- Doser B switched off, regeneration impaired
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P20D3
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.