OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P20D1

Exhaust Aftertreatment Fuel Injector B Control Circuit/Open

Injector B is a second exhaust fuel doser, found only on layouts with two dosing points, for example twin exhaust paths. This code reports a broken control line or open coil on that second unit. No manufacturer documents P20D1 publicly; the logic would mirror injector A, where GM's diesel tables look for an off-state output voltage stuck in a mid band (P20CB, Type B). CARB wants every electrical part of an in-exhaust injection system covered by the comprehensive component checks. Most single-doser engines never set it, and many car diesels heat the filter by late in-cylinder injection instead of a doser at all.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number– / D1

Possible causes

  • Loose or corroded connector at doser B high
  • Broken wire to doser B medium
  • Open solenoid winding in doser B low

Symptoms

  • Check engine light on
  • Regeneration incomplete on the affected exhaust path

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P20D1

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication