OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P20C8

Reductant Heater D Control Circuit High

Diesel exhaust fluid freezes at about -11 °C, so SCR systems carry several electric heating elements in the tank, pump and lines; which one a maker calls heater D varies. P20C8 reports that the control circuit of heater D reads high, meaning the output or its wiring has contact with battery voltage and the element can no longer be switched as commanded. GM names P20C8 for the 3.0 L LM2 Duramax in bulletin 21-NA-149, where a chafed engine harness blows fuses and sets a long list of codes. GM's 2025 DEF tables test the comparable heater C circuit (P20C4) through drain voltage and load current and rate it Type A after 2 s. Open, low and performance faults of heater D are P20C5 to P20C7. In frost the fluid may stay solid, dosing stops and the SCR warning follows.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number– / C8

Possible causes

  • Chafed harness letting the heater D control wire touch a battery-voltage feed high
  • Moisture or DEF residue in the heater connector bridging pins medium
  • Internal short inside heater D or its integrated pump or line assembly low
  • Faulty heater output stage in the engine or DEF control module low

Symptoms

  • Check engine light and DEF or emission system warning
  • DEF dosing unavailable in cold weather, NOx warning or later speed limitation
  • Blown fuses and further unrelated codes when a chafed harness is the cause

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P20C8

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication