OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P20C0

Reductant Heater B Control Circuit High

P20C0 reports that heater B's control circuit is high, typically a wire touching a battery feed or a driver that will not switch off. On Ford diesels B is the pressure line heater: with the power stage off, a current below 3 A while the output still carries over 5 V triggers it, and the glow plug module flags the condition in 250 ms. GM's 2025 tables test heater 2 (line heater) with the output off and an elevated voltage window, Type A with a two-second filter; the 2018 tables use a short-to-battery status from the DEF control module. VW uses more than 2.20 A reported by the power stage on the Touareg CNRB, and Deutz FMI 3 for its pressure line heater. A line heater that is powered all the time can overheat the hose, while one the module has shut down leaves it frozen.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number– / C0

Possible causes

  • Line heater control wire shorted to a positive feed high
  • Heater output stage in the DEF, engine or glow plug module stuck on medium
  • Bridged pins in a shared connector next to a supply terminal low

Symptoms

  • Malfunction indicator lamp and DEF warning
  • Line heater may stay on with the engine off, draining the battery
  • Frozen pressure line once the module disables the heater

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P20C0

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication