P20B3
Reductant Heater Coolant Control Valve Circuit Low
P20B3 reports a low reading on the control line of the coolant valve that feeds the DEF heating, the classic picture of a control wire shorted to ground or a solenoid with shorted turns. Depending on how the output stage is wired, the valve then stays permanently energised or never responds, so the DEF can get too warm in summer or remain frozen in winter. No manufacturer is known to describe P20B3 publicly; the classification rests on the CARB rule that actuators in the SCR system be checked continuously for circuit faults. The valve exists mainly on coolant-heated systems, where it governs how quickly frozen DEF becomes available. Before replacing it, look for chafed wiring along the frame and for coolant or DEF inside the connector.
Possible causes
- Valve control wire shorted to ground high
- Valve solenoid with shorted turns (low resistance) medium
- Coolant or DEF inside the valve connector low
Symptoms
- Malfunction indicator and SCR warning on
- DEF tank overheats or does not thaw, depending on valve position
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P20B3
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.