OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P20A5

Reductant Purge Control Valve A Stuck Closed

Stuck closed is the failure in which the purge valve does not switch to the reverse position when the system wants to empty the line. For the CNRB engine of the 2014 Touareg, Volkswagen bases P20A5 on the pressure difference between the start of the pressure reduction and the current value. Ford reports the code on 6.7 L diesel Super Duty trucks of model years 2023 to 2025, F-650/F-750 included: TSB 24-2055, 24-2379 and 25-2032 trace an illuminated MIL with P20A5 to a software issue of the glow dosing module, shown in the scan tool as secondary OBD control module, and cure it by reprogramming; driving is not affected. On other vehicles a jammed valve or a blocked return line is the real cause. P20A4 is the reverse case. A line left full can freeze and crack in winter.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number– / A5

Possible causes

  • Control module software (Ford 6.7 L, reprogram the glow dosing module) high
  • Valve jammed in the delivery position by crystallized DEF medium
  • Return line to the tank kinked or blocked medium
  • DEF pressure sensor frozen at one value low

Symptoms

  • MIL on, often found after a shutdown cycle
  • No change in driveability (Ford software case)
  • Frost damage to line or injector if a real valve fault persists

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P20A5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication