P209A
Reductant Injection Air Pressure Sensor B Circuit
Air-assisted DEF dosing, as in Bosch's first Denoxtronic generation of 2004, mixes the fluid with compressed air before it reaches the exhaust, and a pressure sensor confirms that this air is there. A second sensor B can sit in another air branch or serve as a cross-check for sensor A. P209A is the general circuit fault of sensor B, set when its signal or supply cannot be evaluated at all; P209C and P209D split off the clearly low and high readings. No manufacturer documents P209A publicly, and Deutz, whose air-assisted EMR L1 system has only one such sensor, uses the P2037 family for it. CARB counts air-assisted injection among the delivery functions that must be monitored. Without a usable reading the controller usually suspends dosing, NOx rises and a derate may follow.
Possible causes
- Corroded or loose connector at sensor B, often from DEF residue or road spray high
- Reference voltage or ground of the sensor interrupted or out of range medium
- Internal electronic failure of pressure sensor B medium
- Input stage in the dosing control unit defective low
Symptoms
- Malfunction indicator lamp or SCR warning on
- DEF dosing suspended, higher NOx output
- Engine power derate or inducement countdown on trucks
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P209A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.