OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P208F

Reductant Injection Valve Stuck Closed (Bank 2 Unit 1)

P208F is the Bank 2 version of P208E: the first dosing valve on the second exhaust branch fails to open although its drive circuit is in order. It only applies to engines with two separate SCR branches, each with its own dosing valve, which is rare; most diesel cars and trucks run one valve on Bank 1. No manufacturer documents P208F publicly. The Bank 1 logic shows how the check works: Ford's 2023 diesels judge the valve stroke by stroke and need 50 failed strokes, the 2014 VW Touareg TDI needs over 50 absent current peaks. Ford pauses the test during circuit faults; for Bank 2 those would be P2050 to P2052. Crystallised urea in the nozzle is the most likely cause. CARB requires a reductant delivery fault to be detected. The second branch then receives no fluid, NOx rises and inducement may begin.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number– / 8F

Possible causes

  • Urea crystals blocking the Bank 2 dosing valve high
  • Valve needle stuck from deposits or overheating medium
  • Restricted supply line to the second valve low

Symptoms

  • MIL and DEF or SCR warning
  • Higher NOx on one exhaust branch
  • Possible derate or countdown to no-restart

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P208F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication