OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P208E

Reductant Injection Valve Stuck Closed (Bank 1 Unit 1)

P208E says the first DEF dosing valve does not open although it is energised correctly. Valve movement shows in the coil current: when the armature lifts, the trace kinks. Ford's 2023 diesels judge every stroke and need 50 failures; the test pauses while P2047 to P2049 report a circuit fault. Volkswagen's 2014 Touareg TDI counts more than 50 missing signal peaks, Deutz EMR5 files it as P208E-73, raised by its BIP check that looks for the valve opening. Usually urea crystals block the nozzle. Under Ford SSM 48539 the dosing test is repeated up to three times against a 40 to 50 mL target before the valve, never the pump, is replaced; Mack and Volvo describe intermittent clogging checked by timed flow tests; GM PIP5662 (low cab forward) replaces valve and pump filter. NOx rises and inducement follows.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number– / 8E

Possible causes

  • Urea crystals blocking the dosing valve nozzle high
  • Valve needle seized from deposits or heat medium
  • Contaminated fluid or debris from a dirty pump filter low

Symptoms

  • MIL and DEF dosing warning
  • DEF consumption drops noticeably
  • Derate or countdown to no-restart

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P208E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication