OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P208D

Reductant Pump A Control Circuit High

P208D means the drive of DEF pump A reads high, typically a wire touching battery positive, so the controller has lost authority over the pump. Unlike the open and low faults, Ford checks this one with the driver switched on: on 2023 diesels pump voltage over 16 V or pump controller current above 5 A sets it, confirmed in only 2 s. GM's 2018 diesel table relies on a phase-shorted-to-battery message from the DEF module, 20 of 25 samples, Type A, while the 2014 table watches for high voltage on the active driver. Volkswagen's 2014 Touareg TDI uses a control current above 4.00 A, and Deutz EMR5 files it as P208D-12. For 2013–2014 Ram 2500 and 3500 with the 6.7L Cummins, bulletin 18-010-14 reflashes the doser control unit when the MIL comes on with P208D or P202E. Check for wires pinched against powered cables and wet connectors.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number– / 8D

Possible causes

  • Pump drive wire shorted to a battery feed high
  • Doser control unit software (Ram 6.7L, 18-010-14) medium
  • Moisture or corrosion in the pump connector medium
  • Internal fault in pump or pump controller low

Symptoms

  • MIL and DEF system warning
  • No DEF dosing, rising NOx
  • Countdown to speed limit or no-restart

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P208D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication