OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P208B

Reductant Pump A Control Performance/Stuck Off

P208B is the functional check of DEF pump A: the circuit is intact, yet the pump ignores its command or stays off. Ford, titling it Reductant Pump Control Range/Performance, sets it on 2023 diesels when pump speed misses its setpoint by over 300 rpm or its speed control sits at a limit for 30 s, detected within 5 s and only after the circuit tests have passed. GM's 2014 diesel table reports Reductant Pump Performance when the pump motor's functional acknowledgement takes longer than 4 s, Type B. Deutz EMR5 adds an overheated output stage (P208B-4B) and an abnormal rate of change (P208B-92). In the field the hydraulics are usually to blame: FCA STAR S1925000008 (Grand Cherokee, Wrangler diesel) names trapped air in the tank filter and external leaks, and a Volkswagen 2.0 TDI tip rules out leaking lines first.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number– / 8B

Possible causes

  • Air trapped in the tank filter or suction side after service high
  • Leaking DEF line or connection between pump and dosing valve high
  • Worn, frozen or crystallised pump medium
  • Calibration needing an update (FCA 3.0L diesel) low

Symptoms

  • MIL with DEF system message, often with P20E8
  • White urea crust on lines or fittings
  • Countdown to no-restart or reduced power

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P208B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication