OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P208A

Reductant Pump A Control Circuit/Open

P208A reports an open or otherwise faulty drive circuit of the main DEF pump, the one that builds dosing pressure. Ford's 2023 diesels flag it when pump voltage sits between 2.6 and 3.4 V or the pump controller supply falls under 6 V, tested with the driver off and confirmed after 8 s. GM's 2018 diesel table takes a phase-open message from the DEF module, 32 of 40 samples, Type A; Volkswagen's 2014 Touareg TDI expects 4.70 to 5.40 V on an open line, and Deutz EMR5 files current below normal as P208A-13. Several bulletins blame software rather than parts: Volvo and Mack 2016–2017 chassis at cold start, Range Rover Velar 2.0 diesel together with P208C-11, and GM 23-NA-008 for 2022 trucks whose pump ran against frozen DEF. FCA counts it among inducement triggers.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number– / 8A

Possible causes

  • Unplugged, corroded or broken pump connector or wire high
  • Pump controller or ECU software (Volvo/Mack, JLR, GM 23-NA-008) medium
  • Low supply to the pump controller from fuse, relay or ground medium
  • Pump motor winding open, pump unit failed medium

Symptoms

  • MIL and DEF dosing malfunction message
  • No engine restart countdown
  • Fault often logged at cold start

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P208A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication