P2087
Exhaust Gas Temperature Sensor Circuit Intermittent (Bank 2 Sensor 2)
P2087 is reserved for a bank 2 sensor 2 exhaust temperature signal that is erratic or drops out. No manufacturer publishes it; we checked GM, Ford, VW, Deutz and the NHTSA bulletin index without a hit, and Ford's 2014 petrol list leaves it out. For a monitor in this style, GM's bank 1 counterpart P2085 is the reference: in table 18OBDG04 it counts resistance steps above 10 ohms between samples taken every 100 ms and sets a Type B code at 20 out of 40. CARB requires that intermittent faults of emission-relevant inputs be detected. If the code ever appears, the sensor connector and the lead along the second exhaust pipe are the first things to inspect. P2086 covers a steady but implausible value from the same sensor, P2034–P2036 its hard electrical faults.
Possible causes
- Intermittent contact in the bank 2 sensor 2 connector high
- Lead chafing on the second exhaust pipe medium
- Sensor element with unstable resistance low
Symptoms
- Engine warning lamp on
- Unstable exhaust temperature value for bank 2 sensor 2
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2087
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.