OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2086

Exhaust Gas Temperature Sensor Circuit Range/Performance (Bank 2 Sensor 2)

P2086 would report an implausible reading from the second exhaust temperature sensor on bank 2. Snap-on's code list confirms the wording. No manufacturer document available to us uses the code: GM, Ford and VW keep all diesel sensors on bank 1, Nissan's per-bank petrol layouts stop at sensor 1, and Ford's 2014 petrol list jumps from P2085 to P2088. Do not confuse it with the third sensor on bank 1: Ford's 6.7 L diesel checks sensors 1 to 4 against each other under P2080, P2084, P242B and P246F, with P24C2 for a multi-sensor mismatch. Bank 2 sensor 2 only makes sense with two separate exhaust trains that each carry a catalyst. CARB still requires a rationality check for every emission-relevant temperature input. The nearest documented analogue is P2084 on bank 1.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number– / 86

Possible causes

  • Bank 2 downstream sensor aged or sooted, reading off high
  • Sensor loose or not reaching into the gas stream medium
  • Leak in the bank 2 exhaust ahead of the sensor low

Symptoms

  • Engine warning lamp on
  • Catalyst or filter protection functions limited

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2086

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication