OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2085

Exhaust Gas Temperature Sensor Circuit Intermittent (Bank 1 Sensor 2)

P2085 marks the signal of exhaust temperature sensor 2 on bank 1 as erratic. GM monitors it with the same logic as sensor 1 but on separate counters. In the diesel table 18OBDG04 a step of more than 10 ohms between two 100 ms samples counts as a failure, and 20 failures within 40 samples set the code; on the 3.0 L LZO (25OBDG04B) a raw jump above 100 °C in 12 of 25 samples is enough. Both carry Type B, so the lamp needs a second faulty trip. Ford's 2014 petrol list shows P2085 without the lamp marker. Because sensor 2 often sits under the vehicle, splashed water and road salt in the connector are frequent triggers. Implausible but stable readings set P2084.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number– / 85

Possible causes

  • Water or road salt in the underbody sensor connector high
  • Lead rubbing on the exhaust or a bracket, intermittent break medium
  • Internal fault in the sensor causing unstable resistance medium

Symptoms

  • Engine warning lamp on after repeated occurrence
  • Erratic sensor 2 value in live data
  • Regeneration interrupted

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2085

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication