OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2083

Exhaust Gas Temperature Sensor Circuit Intermittent (Bank 2 Sensor 1)

P2083 reports an unsteady signal from exhaust temperature sensor 1 on bank 2: the value changes by more than the exhaust can physically manage between two readings, or briefly drops out. Only one maker documents it publicly. Infiniti bulletin ITB17-050 lists P2083 with P0544–P0549 and P2080–P2082 for Infiniti's Q50 (model years 2016–2017) and Q60 (2017) with the 3.0 L VR30DDTT twin-turbo V6, which has one sensor per bank, and prescribes an ECM reprogram. Ford's 2014 petrol code list includes P2083 with a lamp marker. No threshold is published for bank 2; GM's bank 1 counterpart P2081 shows the usual approach of counting fast steps in a window of samples. Before replacing parts, wiggle-test the connector and lead while watching live data. A plausible but wrong steady value would be P2082.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number– / 83

Possible causes

  • Intermittent contact in the bank 2 sensor connector high
  • ECM software (Infiniti VR30DDTT bulletin) medium
  • Lead damaged by turbocharger or exhaust heat medium

Symptoms

  • Engine warning lamp on
  • Bank 2 exhaust temperature flickering in live data

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2083

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication