P2082
Exhaust Gas Temperature Sensor Circuit Range/Performance (Bank 2 Sensor 1)
P2082 is the plausibility fault of the first exhaust temperature sensor on bank 2, the cylinder bank without cylinder 1. It only exists where both banks carry separate sensors ahead of the merge point, which in practice means V-type petrol engines with turbo or catalyst protection. The diesel tables from GM, Ford and VW number every sensor on bank 1 because one aftertreatment line serves the engine. Nissan is the documented user: bulletins NTB16-124 and ITB16-051 cover the 2017 Armada, Titan and QX80 with the VK56VD, where P2080 and/or P2082 came on although the sensors were fine; the cure is new ECM software, and the bulletin explicitly says not to replace the sensor. ITB17-050 does the same for the Q50 and Q60 with the VR30DDTT. Nissan does not publish the thresholds. Jumping values on this sensor are P2083.
Possible causes
- ECM calibration error on affected Nissan/Infiniti models (reprogramming) high
- Bank 2 sensor drifted or contaminated medium
- Exhaust leak on bank 2 ahead of the sensor low
Symptoms
- Engine warning lamp on
- Usually no noticeable driving change
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2082
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.