P2081
Exhaust Gas Temperature Sensor Circuit Intermittent (Bank 1 Sensor 1)
P2081 is set when the signal of exhaust temperature sensor 1 on bank 1 jumps between consecutive readings faster than real exhaust gas can change. GM documents two versions. A diesel in table 18OBDG04 flags a change of more than 10 ohms between two samples taken 100 ms apart and needs 20 such failures out of 40. The 3.0 L LZO (25OBDG04B) looks at the raw temperature step instead, more than 100 °C, in 12 of 25 samples. Both are Type B, so the lamp lights after the second faulty trip. Infiniti lists P2081 with its siblings on the Q50 of 2016–2017 and the Q60 of 2017 (VR30DDTT) and fixes it by reprogramming the ECM. Ford's 2014 petrol code list carries it without a lamp marker. Loose contacts and heat-damaged leads are the classic causes; a steady but wrong value would be P2080.
Possible causes
- Loose or corroded pin in the sensor connector high
- Sensor lead chafed or embrittled by exhaust heat, breaking contact on vibration medium
- Cracked sensing element giving unstable resistance medium
- ECM software issue (Infiniti VR30DDTT reprogramming) low
Symptoms
- Engine warning lamp on, sometimes only after the second trip
- Exhaust temperature value jumping in live data
- Regeneration or turbo protection strategy interrupted
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2081
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.