P2079
Intake Manifold Tuning (IMT) Valve Position Sensor/Switch Circuit Intermittent (Bank 1)
Intended for brief dropouts or jumps in the bank 1 valve feedback that come and go rather than sticking at one limit. No manufacturer documents this meaning publicly. GM's tuning valve tables stop at P2076 to P2078, and Ford's 2014 code list even assigns P2079 to an intake air system leak, an older Ford-specific text that has nothing to do with the position sensor, so scan-tool texts on Ford vehicles can differ. Per CARB, intermittent faults of an input component are covered by the circuit and rationality checks. Loose crimp contacts, a cracked connector housing or a cable that moves with engine rock are the classic sources; wiggle testing while watching the live value is the most useful check.
Possible causes
- Loose or fretted terminals in the sensor connector high
- Wire broken inside the insulation, contact lost with engine movement medium
- Dead spot on the sensor track low
Symptoms
- Light comes and goes (manufacturer-dependent)
- Fault often not present during workshop test
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2079
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.