P2071
Intake Manifold Tuning (IMT) Valve Stuck Closed (Bank 1)
Counterpart to P2070: the bank 1 tuning valve receives an open command, but the position feedback keeps showing it shut. In GM's 2006 and 2007 tables the check simply compares commanded and actual flap position under load between 1000 and 3600 rpm, Type B. From 2015 on (also engine LWE in 18OBDG03A) GM requires that the open stop is reached within 5 s; 320 failed out of 400 samples set the code, and it stays blocked while P0660 to P0662 or the sensor codes P2077/P2078 are active. GM's 2023/2024 tables describe P2071 as stuck open, so on those vehicles the meaning of P2070/P2071 should be checked against the service data. Ford lists the code without MIL. Expect lost power at high rpm; bank 2 uses P206F.
Possible causes
- Flap seized shut by deposits or corroded shaft bushings high
- Actuator defective, no longer turns the flap against its return spring medium
- Weak supply to the actuator from a corroded connector or relay contact low
Symptoms
- Lack of power at high engine speed
- Check engine light (GM Type B, Ford without MIL)
- Engine otherwise runs normally
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2071
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.