OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P206D

Reductant Quality Sensor Circuit High

P206D is the upper limit counterpart of P206C. In GM's 2018 diesel table it is electrical: the piezo input of the ultrasonic quality sensor above 4.5 V in 40 of 50 samples, Type A. Ford's 2023 diesels set it when filtered urea concentration reads 60 % or more for over 900 s, which real DEF never reaches, so either the sensor or a foreign fluid is to blame. GM PIP5635 for 2019 Colorado and Canyon 2.8L names a false cause: urea crystals that form around the sensor when the fluid freezes and thaws. Before repairs, sensor status should read OK, concentration 28 to 40 % and the tank above 5 °C; if not, warm the truck indoors and drive it in traffic for 10 minutes. FCA STAR case S2025000006 for 2020 Wrangler and Gladiator diesels calls the code mainly electrical but asks for a refractometer and hydrocarbon strip test too.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number– / 6D

Possible causes

  • Urea crystals around the sensor after freeze and thaw high
  • Sensor signal open or shorted to voltage, failed sensor medium
  • Foreign or over-concentrated fluid in the tank medium

Symptoms

  • MIL and DEF or emission system warning
  • Fault often after cold nights
  • Countdown toward speed limit or no-restart

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P206D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication