OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P206C

Reductant Quality Sensor Circuit Low

P206C is the low-side fault of the quality sensor, read in two ways. GM treats it as electrical: in its 2018 diesel table the piezo input of the ultrasonic sensor below 0.15 V in 40 of 50 samples sets the code, Type A. Ford uses it as a quality verdict: its 2023 diesels flag P206C when the filtered urea concentration stays at 28 % or less for over 900 s, and Ford SSMs 46890 to 50323 for 6.7L, 3.2L and 3.0L diesels say most cases come from diluted DEF, so the fluid is checked with a refractometer and replaced before parts are swapped, since low concentration also triggers a derate. GM PIP5602 for 2019 Colorado and Canyon 2.8L adds a false trigger: at roughly 30 % fill or less, a long right-hand curve can uncover the sensor; no parts are replaced, the tank is simply filled. Above-range readings belong to P206D.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number– / 6C

Possible causes

  • Diluted or wrong fluid in the DEF tank (Ford definition) high
  • Low tank level letting the sensor run dry in curves medium
  • Sensor signal shorted to ground or failed sensor element medium

Symptoms

  • MIL and DEF quality or emission system warning
  • Reduced power or speed limit on Ford diesels
  • Warning that appears after a long curve and then clears

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P206C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication