OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2066

Fuel Level Sensor B Performance

P2066 flags a second fuel level sender whose reading is electrically valid but does not behave like real fuel. Makers test it differently. GM, on dual-tank trucks with an electric transfer pump, calls it Fuel Level Sensor 2 Performance and looks for a secondary reading that stays frozen while the engine burns 18 L or more, or that barely moves while the pump transfers fuel; Type B, two trips. Ford instead files a noisy signal here: more than 100 jumps of over 40 % between samples taken every 0.1 s, while a stuck sender B gets P25B1. Genesis compares calculated fuel use with the change the sender reports and revised that logic for the 2025 GV80 (25-01-026G). Jeep released PCM flashes for P2066 on 2021–2024 Grand Cherokee models, one symptom being a MIL after refuelling with the engine running. Mercedes uses P206600/P206609.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number– / 66

Possible causes

  • Float arm sticking or sender card worn in one spot high
  • Transfer or jet pump not moving fuel between tank halves medium
  • Plausibility logic needing a software update (Jeep, Genesis) medium
  • Poor contact causing a noisy signal (Ford definition) low

Symptoms

  • Fuel gauge stays put or lags behind real consumption
  • MIL after refuelling or long drives
  • Range display and low fuel warning unreliable

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2066

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication