OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2065

Fuel Level Sensor B Circuit

Sensor B is the second fuel level sender, used where one sender cannot cover the whole tank: the passive half of a saddle tank, a secondary tank on dual-tank trucks, or the secondary lever-type sender that Mercedes reads through its fuel pump module. Ford explains the saddle layout: a jet pump moves fuel to the active side, and both readings are averaged into one gauge value. P2065 is the general circuit code for this input, meaning an electrical fault not classified as low, high or intermittent. Ford's 2014 Boss 302S code list marks P2065 as a MIL code, and the 2024 Ford OBD summary uses P2065 as the base code for failure types such as -11, -12, -1C and -2A. CARB expects fuel level inputs to be monitored, because misfire and evaporative checks are suspended at low levels. Gauge and low fuel warning may mislead.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number– / 65

Possible causes

  • Loose or corroded connector at the second sender or pump module high
  • Broken wire between sender and the module that reads it medium
  • Worn or failed sender card in the tank medium
  • Control module software that does not match the tank layout low

Symptoms

  • Fuel gauge reads wrong, stuck or jumps
  • Low fuel warning comes on with a full tank or not at all
  • MIL on, evaporative monitor may not complete

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2065

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication