P2064
Reductant/Regeneration Supply Control Circuit High
P2064 closes the supply control group that begins with P2062. The line that switches power to the reductant supply, in a few layouts to regeneration hardware, carries a level that only a connection to a positive feed can explain, or the stage stays live while the controller has it switched off. No manufacturer documents P2064 publicly. Related component codes show how such a fault is caught: Deutz files a DEF pump high side shorted to battery as P05F0-00 on its EMR L1 secondary controller, and Ford's 2023 diesels set P208D once pump voltage tops 16 V or the pump controller draws over 5 A with the driver on, confirmed within 2 s. Suspects are a chafed wire touching a powered circuit, a welded relay contact or a wet connector. Unlike P2063 the pump may keep running unbidden, yet dosing is still suspended.
Possible causes
- Control line chafed through and touching a powered wire high
- Supply relay contact welded closed medium
- Water or corrosion bridging pins in the supply connector medium
- Faulty output stage in the controlling module low
Symptoms
- MIL and SCR or DEF warning in the cluster
- DEF pump audible after it should have stopped
- Countdown toward speed limit or no-restart after repeated faults
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2064
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.