P2063
Reductant/Regeneration Supply Control Circuit Low
P2063 says the reductant or regeneration supply control circuit reads too low, the classic signature of a grounded control line or of a load drawing far more current than it should, which pulls the driver output down. No manufacturer documents P2063 publicly. The comparable component code in Ford's 2023 diesel summary is P208C, set when reductant pump current exceeds 5 A or the pump controller draws more than 15 A; Deutz files a grounded DEF pump high side as P05EF-00. Seized pump motors, especially after DEF has crystallised, and harness damage near the tank are the usual suspects. While P2062 means no current at all, here the stage is overloaded, and fuses or relays may be found burnt. Dosing is suspended until the circuit is repaired.
Possible causes
- Supply control wire shorted to ground near the tank high
- Pump motor seized or blocked by DEF crystals medium
- Internal short in the pump winding low
Symptoms
- Engine or emission warning lamp on
- Fuse for the DEF supply blows repeatedly
- Dosing suspended, possible speed or restart limitation
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2063
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.