OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P205B

Reductant Tank Temperature Sensor A Circuit Range/Performance

P205B is the rationality check of the DEF tank temperature: after a long cold soak every sensor should read about the same, so a tank value far off the rest is flagged. GM's 6.6L LML compares it with fuel temperature after 28,800 s engine off (beyond +35/−35 °C, Type B); GM's 2018 diesel table uses the exhaust gas temperature average (>35 °C, Type A), and the 2025 DEF controller needs at least four reference sensors and over 8 h off (>30 °C, Type A). Ford's 2023 diesels compare it with the quality sensor at start (>40 °C), VW's Touareg with outside air. Volvo/Mack (KC-2107) have it re-run before replacing the level sensor, and Ford (2019 6.7L), Land Rover (2016 TDV6) and GM (2021–22 3.0L) cured cases by software. Circuit faults are P205C/P205D.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number– / 5B

Possible causes

  • Calibration error, fixed by reprogramming high
  • Tank temperature sensor reading off (offset or gain) medium
  • Frozen tank or low fill level distorting the reading medium
  • Faulty reference sensor (fuel, exhaust or quality sensor) low

Symptoms

  • MIL, sometimes with an emissions service message
  • Usually no change in driving

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P205B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication