P2058
Reductant Injection Valve Circuit High (Bank 2 Unit 2)
P2058 indicates that the second DEF injector on Bank 2 sees battery voltage on its switched line. Like the other Bank 2, unit 2 codes it is reserved for twin-bank engines with two dosing points per bank, and no manufacturer documents it publicly. The Bank 1 counterpart P2055 appears in GM's 2025 diesel table as a power short of metering valve 2 (Type A after 30 of 60 samples), while Ford's 2023 summary uses that number for a coil resistance more than 2 ohm too high, a reminder that meanings can shift between makers. CARB's comprehensive-component rules require such circuit checks. Moisture in the plug, a short to a neighbouring supply wire or a failed output stage are the usual suspects; dosing at that point stops.
Possible causes
- Moisture in the injector plug high
- Short to a neighbouring supply wire medium
- Failed output stage in the control module low
Symptoms
- MIL on
- No dosing at the Bank 2 second valve
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2058
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.