P2056
Reductant Injection Valve Circuit/Open (Bank 2 Unit 2)
P2056 refers to the fourth possible DEF injector position: the second valve in the Bank 2 exhaust line. It requires both a twin-bank layout and two dosing points per bank, a combination hardly any production engine uses; no manufacturer publicly documents the code. Detection would resemble GM's open-load check for metering valve 2 in its 2025 table (P2053): driver status read every 100 ms, more than 11 V on board, 30 bad samples out of 60, Type A. CARB lists reductant system valves among the electrical components whose circuits the OBD system has to verify. Before condemning a part, confirm which physical injector the scan tool assigns to Bank 2, unit 2, because confusing banks and units is an easy way to replace the wrong valve.
Possible causes
- Connector of the Bank 2 second injector unplugged or corroded high
- Broken wire in the Bank 2 dosing harness medium
- Open injector coil medium
Symptoms
- MIL on
- Reduced NOx conversion on Bank 2
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2056
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.