OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2055

Reductant Injection Valve Circuit High (Bank 1 Unit 2)

P2055 is set when the control line of DEF injector 2 on Bank 1 is shorted to battery positive. In GM's 2025 diesel table (25OBDG04B) the power stage of metering valve 2 reports the short; with more than 11 V and 30 faulty readings out of 60 the ECM stores a Type A fault, just as P2049 does for valve 1. Deutz assigns failure type 12 (voltage above normal or short to the high source) to metering unit 2 on EMR5 engines. On Ford's 2023 diesels the code instead describes a coil resistance more than 2 ohm above expectation, which hints at corroded terminals or an ageing winding. Whatever the platform, a driver that detects overvoltage is disabled, so the second dosing point delivers nothing until the circuit is repaired.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number– / 55

Possible causes

  • Control line of injector 2 shorted to battery positive high
  • Coil resistance too high, corroded terminals (Ford definition) medium
  • Defective output stage for valve 2 low

Symptoms

  • MIL on
  • Second dosing point inactive
  • Increased NOx emissions

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2055

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication