OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2053

Reductant Injection Valve Circuit/Open (Bank 1 Unit 2)

P2053 concerns a second DEF injector on the same exhaust line as Bank 1, unit 1, used where a manufacturer doses at two points, for instance ahead of two separate catalysts. GM's 2025 table (25OBDG04B, which also covers an inline-six diesel) monitors this DEF metering valve 2 with the same open-load logic as valve 1: more than 11 V, 30 faulty samples out of 60 at 100 ms, Type A; a separate P1C30 checks its coil temperature after a long soak. Deutz's EMR5 engines assign P2053 to metering unit 2, with failure bytes for current above normal (grounded) and below normal (open). If valve 2 drops out, valve 1 keeps working, so the downstream catalyst simply loses its DEF and NOx rises only partly, often noticed just through the MIL.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number– / 53

Possible causes

  • Disconnected or corroded plug at DEF injector 2 high
  • Broken wire between control module and injector 2 medium
  • Open coil in injector 2 medium

Symptoms

  • MIL on
  • Slightly higher NOx, little noticeable otherwise
  • DEF system message

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2053

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication