OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2052

Reductant Injection Valve Circuit High (Bank 2 Unit 1)

P2052 tells that battery potential is present on the switched line of the first Bank 2 injector, for example through a short to a powered wire or moisture bridging connector pins. It belongs to twin-bank SCR layouts in which each cylinder bank owns an injector; publicly, no manufacturer documents this code or its thresholds. For the matching Bank 1 code P2049, GM's 2014 Cruze diesel uses Type B (two trips) and the Deutz EMR5 list describes voltage above normal or a short to the high source, so P2052 would presumably follow the same logic. A driver that sees a short to positive normally switches off to protect itself, leaving the second branch without DEF. CARB's comprehensive-component rules apply; check plug, harness and coil resistance first.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number– / 52

Possible causes

  • Control line of the Bank 2 injector touching a supply wire high
  • Moisture bridging pins in the Bank 2 injector plug medium
  • Faulty output stage for the Bank 2 valve low

Symptoms

  • MIL on, possibly after two trips
  • No DEF on Bank 2
  • Higher tailpipe NOx

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2052

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication