OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2050

Reductant Injection Valve Circuit/Open (Bank 2 Unit 1)

P2050 reports an open circuit at the first DEF injector of Bank 2, the cylinder bank opposite cylinder 1. The code only makes sense on engines whose two exhaust banks each feed their own SCR branch with a separate valve. No manufacturer publicly documents P2050; V-engines found in bulletins, such as the Cummins 5.0 L V8 in Nissan's Titan XD, combine both banks into one SCR line and report their only valve as Bank 1, unit 1. Detection would mirror P2047: GM's 2018 diesel logic reads the driver status every 100 ms with more than 11 V and needs 30 bad samples out of 60. CARB requires such actuators to be checked as comprehensive components. Suspects are plug and harness on the second exhaust branch and the coil itself; without dosing that branch emits more NOx.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number– / 50

Possible causes

  • Unplugged or corroded connector at the Bank 2 injector high
  • Broken wire in the harness of the second exhaust branch medium
  • Open coil in the Bank 2 DEF injector medium

Symptoms

  • MIL on
  • Higher NOx from the Bank 2 branch
  • DEF warning, later inducement possible

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2050

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication