P204E
Reductant Pressure Sensor Circuit Intermittent/Erratic
P204E covers a DEF pressure signal that jumps around although it stays inside the electrical limits, as with a loose terminal, a cracked wire or a sensor with an internal contact problem. GM's 2025 DEF controller is the public calibration: it adds up all absolute pressure changes over a moving window of 100 readings taken every 10 ms and counts a failure when that sum passes 1500 kPa while pumping forward, 1000 kPa when stopped or heating, or 200 kPa in reverse; ten failures within 100 runs store a Type A code. No other manufacturer documents the code in public. CARB expects input components to be checked for implausible as well as out-of-range signals. Besides the wiring, air in the line or a pump delivering unevenly can also make the pressure swing.
Possible causes
- Loose or fretted terminal at the pressure sensor connector high
- Wire breaking intermittently under vibration medium
- Air in the DEF line or uneven pump delivery medium
- Pressure sensor with internal intermittent fault low
Symptoms
- MIL on, fault may come and go
- Dosing interrupted at times
- Accompanying DEF pump or pressure codes
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P204E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.