OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2048

Reductant Injection Valve Circuit Low (Bank 1 Unit 1)

P2048 means the control line of the Bank 1, unit 1 DEF injector is pulled toward ground, typically a chafed wire touching the chassis or an internal short in the coil. GM's LML calibration treats less than about 0.5 ohm between signal and ground for 2 s as a failure (Type A). Ford's 2023 diesel logic reports the code once injector current exceeds 1.6 A; Deutz's EMR5 list files it under voltage below normal on the metering unit. Nissan reflashed the ECM of the 2016 to 2019 Titan XD with the Cummins 5.0 L V8 because P2048 appeared without a real defect, and Volvo traced it to a harness rubbed through on VNR trucks. While the code is active, dosing is normally blocked; the catalyst no longer reduces NOx and the inducement countdown may begin.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number– / 48

Possible causes

  • Control wire chafed against chassis or exhaust bracket high
  • Shorted winding inside the DEF injector medium
  • ECM software setting the code without a fault (Nissan Titan XD reflash) medium
  • DEF residue or water bridging the connector pins low

Symptoms

  • MIL on
  • DEF dosing suspended, warning in the instrument cluster
  • Inducement or reduced power after a countdown

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2048

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication